JX1075N 2WD
Make: Case-IH
Model: JX1075N 2WD
Hydraulic System: Open Center System
Maximum Pressure: 2610 PSI
Maximum Flow: 12.4 GPM
This model has multiple hydraulic systems available. Verify system type for proper pump selection and setup.
Pump Model: FMC-HYD-210
Pump Model: FMC-150-HYD-206
Pump Model: FMC-200-HYD-210/304
Port Sizes: 2" X 1-1/2"
Max Flow: 200 GPM
Maximum Shutoff Pressure: 80 (210) / 120 (304) PSI
Installation Instructions for Open Center System
1. Shut off all flow from ACE pump.
2. Install pressure gauge between pump and shut off valve.
3. Open Bypass Adjusting Screw 3 or 4 turns.
4. Set tractor throttle to speed at which you will be spraying.
5. Move hydraulic lever to "Lower/Retract" to start pump.
6. Turn Bypass Adjusting Screw clockwise until pressure gauge on sprayer reads between 60 and 100psi. Tighten jam nut.
7. Open sprayer agitation valve to get desired spraying pressure.