6240
Make: Deutz Allis
Model: 6240
Hydraulic System: Open Center System
Maximum Pressure: 2538 PSI
Maximum Flow: 7.5 GPM
Hydraulic oil coolers are not standard on these tractor models. An oil cooler is required for continuous duty sprayer pump operation.
Pump Model: FMC-HYD-204
Pump Model: FMC-150-HYD-206
Installation Instructions for Open Center System
1. Shut off all flow from ACE pump.
2. Install pressure gauge between pump and shut off valve.
3. Open Bypass Adjusting Screw 3 or 4 turns.
4. Set tractor throttle to speed at which you will be spraying.
5. Move hydraulic lever to "Lower/Retract" to start pump.
6. Turn Bypass Adjusting Screw clockwise until pressure gauge on sprayer reads between 60 and 100psi. Tighten jam nut.
7. Open sprayer agitation valve to get desired spraying pressure.