1530
Make: John Deere
Model: 1530
Hydraulic System: Pressure Compensating Closed Center System
Maximum Pressure: 2250 PSI
Maximum Flow: 6.5/12 GPM
Pump Model: FMC-HYD-204
Pump Model: FMC-150-HYD-206
Installation Instructions for Pressure Compensating Closed Center System
1. Install the RESTRICTOR ORIFICE on the intake port of the ACE motor.
2. Close the needle valve on the ACE motor by loosening the jam nut and screwing the needle valve in a clockwise direction all the way in. Tighten the jam nut.
3. Move the Rabbit/Turtle control to the turtle position.
4. Move hydraulic lever to the "Lower/Retract" position to start pump.
5. Open the sprayer agitation valve and adjust Rabbit/Turtle flow control to get desired spraying pressure.