M7-132 (STANDARD)
Make: Kubota
Model: M7-132 (STANDARD)
Hydraulic System: Pressure Compensating Closed Center System
Maximum Pressure: NA PSI
Maximum Flow: 21 GPM
This system uses a fixed displacement (Open Center) pump with pressure compensated valves. Use the Open Center instructions, but install the restrictor orirfice in the inlet port of the motor.
Pump Model: FMC-HYD-210
Pump Model: FMC-150-HYD-206
Pump Model: FMC-650-HYD
Pump Model: FMC-200-HYD-210/304
Port Sizes: 2" X 1-1/2"
Max Flow: 200 GPM
Maximum Shutoff Pressure: 80 (210) / 120 (304) PSI
Installation Instructions for Pressure Compensating Closed Center System
1. Install the RESTRICTOR ORIFICE on the intake port of the ACE motor.
2. Close the needle valve on the ACE motor by loosening the jam nut and screwing the needle valve in a clockwise direction all the way in. Tighten the jam nut.
3. Move the Rabbit/Turtle control to the turtle position.
4. Move hydraulic lever to the "Lower/Retract" position to start pump.
5. Open the sprayer agitation valve and adjust Rabbit/Turtle flow control to get desired spraying pressure.