Massey Ferguson

MF6180

Make: Massey Ferguson

Model: MF6180

Hydraulic System: Open Center System

Maximum Pressure: 2610 PSI

Maximum Flow: 14.9 GPM

These trac­tors have an option­al LS CLOSED hydraulic sys­tem. For the LS Closed sys­tem the Max. Remote Pres­sure is 2900 PSI and Max Remote Flow is 26 GPM 

Pump Model: FMC-HYD-210

FMC-HYD-210

Port Sizes: 1-1/4" X 1"

Max Flow: 100 GPM

Maximum Shutoff Pressure: 100 PSI

Pump Model: FMC-150-HYD-206

FMC-150-HYD-206

Port Sizes: 1-1/2" X 1-1/4"

Max Flow: 120 GPM

Maximum Shutoff Pressure: 120 PSI

Pump Model: FMC-200-HYD-210/304

FMC-200-HYD-210/304

Port Sizes: 2" X 1-1/2"

Max Flow: 200 GPM

Maximum Shutoff Pressure: 80 (210) / 120 (304) PSI

Installation Instructions for Open Center System

Installation Instructions for Open Center System

1. Shut off all flow from ACE pump.
2. Install pressure gauge between pump and shut off valve.
3. Open Bypass Adjusting Screw 3 or 4 turns.
4. Set tractor throttle to speed at which you will be spraying.
5. Move hydraulic lever to "Lower/Retract" to start pump.
6. Turn Bypass Adjusting Screw clockwise until pressure gauge on sprayer reads between 60 and 100psi. Tighten jam nut.
7. Open sprayer agitation valve to get desired spraying pressure.